Macro AF Adapter for Canon FD Lens to Olympus 4/3 Four Thirds mount E-30 520 450

Product Code: AF-FD-O43
Availability: In Stock
Tags: Macro AF


Brand New Macro Confirmed Canon FD lens to Olympus / Panasonic 4/3 camera adapter

+ for Olympus lens caps



Detail Information

This item can allow Olympus DSLR or Digital Cameras. This item allows use to use any old Canon FD lens and screw on to their own Olympus camera. It acts as a middle connection inbetween their camera lens and the other FD lens.

You will not be able to use AF with this ring, and it is macro confirmed only, cannot focus to infinity.

By using this AF confirm lens adapter is useful for manual focusing. Simply half-press the shutter when pointing your lens to the object. Adjust the AF ring of your lens until you hear a beep sound, and you will obtain an accurate focus. The view finder will indicate the focused area with a spot as well.

User Instruction: Please use the adapter in this way

To Mount: Turn off the camera. Mount the Lens onto the adapter then mount them onto the camera.

To Remove: Remove both lens / adapter together from the camera, press the lens lock and then remove the adapter from the lens simultaneously.

- In A (aperture-priority AE) mode in auto exposure, the aperture display is not available.
-In the P (Program AE), or S (Shutter speed-priority AE) mode but the auto exposure control does not work properly.  It is better to set camera on AF-C.

Compatible for:

Olympus 4/3 - E520 E510 E500 E420 E410 E400 E330 E300 E3 
Leica Digilux 3, Panasonic DMC-L10

E-1 is the recommended Olympus 4/3 system to use with this adapter (no modifications needed to make on the lens or camera, in order to use this adapter)

E-300/E-330;  You need to either 'shave about 0.3mm off the lens aperture pin or modify the light box on E-300/E-330' 

other models, work well for most of the FD lens..


Package inclduded:

Brand NEW AF confirmed Adapter

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: